This high-quality MPO to 12x LC(6 Duplex) Fanout/breakout Cable, MPO Connector Female without PIN.MMF(50/125um), OM3 10G standard, LSZH -12 Core Fiber. Jacketed with compounds that emit limited smoke and no halogen when exposed to high heat sources(Low-smoke-zero-halogen Rated). Insertion loss: 35dB, Insert- pull test: 500times<0.5 dB. For QSFP+ Transceivers Link, Contact us for OEM or Custom.

MTP/MPO are used to interconnect cassettes, panels, or fan outs, it offered in fiber typs in standard 8 , 12 ,24 ,or 48 cores versions using a compact and rugged microcables structre. The compact cable optimize cableway use and improve airflow. These MPO/MTP cable are build with the highest quality components , Low loss elite versions are offered, featuring low insertion loww for demanding high speed networks where power budgets are critical. 

APPLICATION

Data communication network Optical System Access network Storage area networking fiber channel High density architectures 

FEATURES

100% pre-terminated and tested in factory to ensure transfer performance Rapid configuration and networking, reduce installation time Supports 40G and 100G network applications Jacket material: LSZH, OFNR, OFNP available Supports up to 12F, 24F, 48F, 72F, 96F, 144F, customized products are available
 

Features:

MPO (female) to 12xLC
MPO Female, without PIN
MMF(50/125um), OM3
Insertion loss : MPO <0.7 dB; LC <0.3dB
Return loss : MPO >35dB; LC>30dB
Insert- pull test : 500times <0.5 dB
Operation temperature : -40℃ ~+80℃

What we can do:

①MPO/MTP Trunk Cable
②MPO/MTP Harnesses Cables
③MPO/MTP Fan out 0.9mm Patch Cords
④IP-Series MPO/MTP Assembly
⑤High Density Patch Cords
⑥MPO/MTP Loopback
⑦MT Patch Cords
⑧MPO/MTP Cassettes
⑨MPO/MTP Fiber Optic Patch Panel

Features

* High Performance in IL & RL

* 4,8,12 and 24 fiber connector terminations and assemblies

* Designed for low loss and standard loss SM and MM applications

* Economical solution for mass-termination of fiber

* Suitable for MPO/MTP application

* Ruggedized round cable, oval cable and bare ribbon options available

* Color coded housings available to differentiate fiber type, polish type and/or connector grade

Associated Standards:

* Meets IEC Standard 61754-7& JIS C5982

* Structured cabling per TIA-568-C

* Parallel Optics
- Optical Internetworking Forum (OIF) Compliant
- Infiniband Compliant

* Infiniband
- 10G Fiber Channel Compliant
- 40G and 100G IEEE 802.3
- QSFP

Connector Performance-MTP

Connector Type	12-Fiber Or 24Fiber MPO/MTP (non-pinned)
Polish	PC(MM); APC(SM)
Housing Colour	MM (Beige), MM Elite (Aqua), SM (Green), SM Elite (Yellow)
Insertion Loss, Typical (MTP/MPO)	≤ 0.10 dB
Insertion loss, max. (MTP/MPO)	≤ 0.3 dB
Return loss (MTP/MPO SM)	PC >55dB; APC> 60dB
Insertion Loss, Typical (LC/SC)	≤ 0.10 dB
Insertion loss, max. (LC/SC)	≤ 0.3 dB
Return loss (LC/SC SM)	PC >55dB; APC> 65dB
Durability(500 Matings)	< 0.2dB

Fiber Cable Performance

Fiber Type	OS2, OM1, OM2, OM3, OM4
Fiber Count	12,24,48,72,96,144 cores
Fiber Attenuation dB (OS2)	≤0.38 Max ≤0.34Typ(1310nm) ≤0.25 Max ≤0.19Typ(1550nm)
Fiber Attenuation dB (OM1)	≤3.5 Max ≤2.7Typ(850nm) ≤1.5Max ≤1.2Typ(1300nm)
Fiber Attenuation dB (OM2)	≤3.5 Max ≤2.7Typ(850nm) ≤1.5Max ≤0.9Typ(1300nm)
Fiber Attenuation dB (OM3)	≤3.5 Max ≤2.7Typ(850nm) ≤1.5Max ≤0.9Typ(1300nm)
Fiber Attenuation dB (OM4)	≤3.5 Max ≤2.7Typ(850nm) ≤1.5Max ≤0.9Typ(1300nm)
Min.Bandwidth:Overfilled Launch[Mhz-km]	OM1≥200(850nm) ≥500(1300nm) OM2≥500(850nm) ≥500(1300nm) OM3≥1500(850nm) ≥500(1300nm)OM4≥3500(850nm) ≥500(1300nm)
Min.Bandwidth:Laser Effective Modal Bandwidth [Mhz-km]	OM3 ≥2000(850nm) OM4 ≥4700(850nm)
Outer diameter	12fiber:3.0 or 5.5mm ; 24fiber:3.0 or 5.5mm
Outer jacket Colour	OS2(Yellow),OM2(Orange),OM3(Aqua),OM4(Purple or Aqua)
Outer jacket material	LSZH,OFNP,OFNR
Tensile strength	>500N
Operating Temperature	-40 ~ +85°C

Welcome to your inquiry about MPO/MTP to 12XLC Type B Breakout Fiber Optic Cable OM3 40GbE Patch Cord.

Inquiry Cart 0